Leading the world and advocating national spirit

18 Years Factory Ballistic Bulletproof Helmet - MICH 2000 Military Ballistic Helmets – Linry

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

We pursue the administration tenet of "Quality is remarkable, Services is supreme, Status is first", and will sincerely create and share success with all customers for Ballistic Chest Plate, Helicopter Bulletproof Plate, Ultra-High Molecular Weight Polyethylene, We welcome clients, enterprise associations and friends from all components from the earth to make contact with us and find cooperation for mutual positive aspects.
18 Years Factory Ballistic Bulletproof Helmet - MICH 2000 Military Ballistic Helmets – Linry Detail:

Product Function

The helmet shell is made of pure imported aramid woven fabric or uhmwpe, and the surface is sprayed with military polyurea elastomer coating. Suspension system: 4-point suspension technology is used internally to improve the stability of helmet wearing. Equipped with adjustable headband, the size of the head circumference can be adjusted through four structural parts to maximize the stability of the helmet.

Product Performance

The bulletproof helmet shall be tested according to the specified bullet type and bullet speed of different protection levels. In the case of 5 effective hits, the bulletproof helmet shall block the warhead, the bullet mark height of the helmet shell shall be less than or equal to 25mm, and the suspension buffer system has no parts separated after the test.

Water resistance: After the bulletproof helmet is soaked in water for 24h at room temperature, there should be no cracks, bubbles or layering on the surface of the helmet shell. In the case of 2 effective hits, the bulletproof helmet shall block the warhead, the height of the first shell shall be less than or equal to 25mm, and the suspension buffer system has no parts off after testing.

Environmental adaptability: Under the ambient temperature -25℃~ +55℃, no cracks, bubbles or stratification on the surface of the shell. In 2 effective hits, the bulletproof helmet shall block the warhead, the bullet mark height of the first bullet point shall be less than or equal to 25mm, and the suspension buffer system shall not have parts after the test.

Parameter Configuration

1. Composition structure: Composed of helmet body, suspension buffer system (cap hoop, buffer layer, jaw belt, connector, etc.)
2. Material: The helmet shell is made of aramid dipping machine woven cloth or uhmwpe.
3. Helmet weight: ≤1.5KG
4. Protective area: 0.145m2
5. Level: NIJ0101.06 IIIA

1636964395549465
1636964453226691
1636964492304368
1636964529455507

* The materials and design have been altered in order to reduce the helmet’s weight significantly, but maintaining the optimal ballistic protection.
* The harness has also undergone some changes. With its new design and the use of new
* materials are lighter and more comfortable.
* The harness can be adjusted to fit a wide variety of different head sizes and shapes using four (4) basic adjustment points:
* I. Headband
* II. Bridge buckle
* III. Lateral suspension
* IV. Chinstrap
* Once the helmet has been fully adjusted, to remove it, simply press the snaps on the chinstrap.
* The paint covering the helmet, and its tough and durable finish, enables us to provide solutions for different IRR requirements.

1632464790479558


Product detail pictures:

18 Years Factory Ballistic Bulletproof Helmet - MICH 2000 Military Ballistic Helmets – Linry detail pictures

18 Years Factory Ballistic Bulletproof Helmet - MICH 2000 Military Ballistic Helmets – Linry detail pictures

18 Years Factory Ballistic Bulletproof Helmet - MICH 2000 Military Ballistic Helmets – Linry detail pictures

18 Years Factory Ballistic Bulletproof Helmet - MICH 2000 Military Ballistic Helmets – Linry detail pictures

18 Years Factory Ballistic Bulletproof Helmet - MICH 2000 Military Ballistic Helmets – Linry detail pictures

18 Years Factory Ballistic Bulletproof Helmet - MICH 2000 Military Ballistic Helmets – Linry detail pictures


Related Product Guide:

Our enterprise aims to operating faithfully, serving to all of our prospects , and working in new technology and new machine frequently for 18 Years Factory Ballistic Bulletproof Helmet - MICH 2000 Military Ballistic Helmets – Linry , The product will supply to all over the world, such as: Algeria, Argentina, Lesotho, The development of our company not only needs the guarantee of quality, reasonable price and perfect service, but also relies on our customer's trust and support! In the future, we will continue with the most professional and high quality service to provide the most competitive price, Together with our customers and achieve win-win! Welcome to inquiry and consult!
  • The sales manager has a good English level and skilled professional knowledge, we have a good communication. He is a warm and cheerful man, we have a pleasant cooperation and we became very good friends in private.
    5 Stars By Cora from Norwegian - 2017.09.28 18:29
    Timely delivery, strict implementation of the contract provisions of the goods, encountered special circumstances, but also actively cooperate, a trustworthy company!
    5 Stars By Anastasia from Denver - 2018.12.11 14:13