OEM Factory for Army Helmet - Popular Design for China Custom Nij IIIA .44 Blue Tactical Helmet Bullet Proof Fast Army Combat Ballistic Helmet – Linry

Product Description

The helmet shell is made of pure imported aramid woven fabric or UHMWPE, and the surface is sprayed with military polyurea elastomer coating. Suspension system: 4-point suspension technology is used internally to improve the stability of helmet wearing. Equipped with adjustable headband, the size of the head circumference can be adjusted through four structural parts to maximize the stability of the helmet. The surface of the helmet is made of nylon net helmet cloth, which is soft, scratch resistant, wear-resistant and static resistant. The inner side is made of strong Velcro design, which can be installed on the fast helmet conveniently and quickly. The outer side is made of auxiliary fixed elastic rope staggered design, which can reinforce and bind the helmet signal lamp and other accessories to prevent the accessories from falling and losing.

Product Description

The bulletproof helmet shall be tested according to the specified bullet type and bullet speed of different protection levels. In the case of 5 effective hits, the bulletproof helmet shall block the warhead, the bullet mark height of the shall be less than or equal to 25mm, and the suspension buffer system has no parts separated after the test.

Water resistance: After the bulletproof helmet is soaked in water for 24h at room temperature, there should be no cracks, bubbles or layering on the surface of the helmet shell. In the case of 2 effective hits, the bulletproof helmet shall block the warhead, the height of the first shell shall be less than or equal to 25mm, and the suspension buffer system has no parts off after testing.

Environmental adaptability: Under the ambient temperature -25℃~ +55℃, no cracks, bubbles or stratification on the surface of the shell. In 2 effective hits, the bulletproof helmet shall block the warhead, the bullet mark height of the first bullet point shall be less than or equal to 25mm, and the suspension buffer system shall not have parts after the test.

Parameter Configuration

1. Composition structure: Composed of helmet body, suspension buffer system (cap hoop, buffer layer, jaw belt, connector, etc.), and new FAST helmet cloth.
2. Material: The helmet shell is made of aramid dipping machine woven cloth or uhmwpe.
3. Helmet weight: ≤1.65KG
4. Level: NIJ0101.06 IIIA